Set full policy="local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox,pas\ Remote-address=vpn-pool use-encryption=yes Set mac-address=Īdd listen-port=13231 mtu=1420 name=wireguard1 Mikrotik # apr/05/2022 08:23:54 by RouterOS 7.1.5Īdd admin-mac= auto-mac=no comment=defconf name=bridge Please see below the configuration of both routers. Everything is working as intended, I have access to my LANs from both sides I think ( at least from one side I have it ) Finally I have managed to achieve my goal.
Even if you can't control the remote side, as long as you can give your remote user instructions of what to do (while you watch), you can usually resolve most issues.ĮDIT: It also raises another question - how were you previously gaining access to the OpenWrt router from your home?Įveryone thanks a lot for your advices and efforts. There are many screen sharing technologies that should work in this scenario, including Chrome Remote Desktop among many other things. I used the browser on his computer (via screenshare) to adjust his local network devices so that I can get the VPN up and running again.
I use the screen sharing built into the Mac OS Messages application, and I did this just yesterday with my father-in-law because their ISP replaced the router (I have an OpenWrt VPN endpoint behind the ISP router).
Provided you can establish a screensharing connection in general, this works for pretty much anything other than failsafe mode or a complete reset that might disable the network/internet connectivity. I use screensharing to deal with things that need local access.
0 kommentar(er)
